Door Handle Replacement
Door handles may seem like an insignificant thing however, if you don't like the style or design of them, or are unable to use them, it's worth replacing them. Installing the new handle on your door is easy if you have patience.
The majority of modern door handles come with cover plates that conceal the screws to create a stylish appearance. However, you'll need to attach them separately if the new handle doesn't have them attached already.
Remove the old Handle
The door handle is not just a decorative feature for your home, but it's also an important safety feature that lets you to lock and unlock your door. As time passes the door handle can become loose or feel a bit loose. It may also appear worn out and old. This is a sign that it's time to replace the door handle.
upvc replacement door handles of the first indications that your door handle requires replacing is the fact that it is becoming difficult to operate. This is a serious problem since you won't be capable of locking or unlocking the door and put you and your family at risk.
Another reason to replace the door handle is if it's damaged or broken. A damaged or broken door handle could be quite dangerous, especially if your children or elderly family members have difficulty opening it and could get trapped in the. Luckily, it's quite easy to fix a broken door handle by simply replacing the handle that was broken.
The majority of modern door handles are a standard size and so they will fit on any door. If you are not certain that your new door handle will work, take out the old one and measure its housing holes. This will let you purchase the right size door handle.
The most straightforward method to remove your old door handle is to remove it from the door. This is usually done with a screw driver. Some door handles have a cover plate which hides the mounting screws. It is necessary to remove this to get to the screws. Once you have removed the old handle, make note of the way the spindle is connected so that you can align it when you fit your new one.
You can also remove the door handle by removing the latch mechanism. This is usually done using the screwdriver, but you'll need to locate the small latch, which is located just to the left of the trim piece. After taking off the latch, remove the handle and the strike plate. Then, you can remove the latch from the edge of the door.
Take off the Strike Plate
When replacing your handle, you'll want to replace the latch plate, which holds the hole which the door's latch hooks into when it closes. The package the new handles come in will include two different latch plates: a rectangular one and a circular one (see the above diagram that outlines door handle parts). If you have a rectangular latch plate, swap it with a circular one. This will let the latch hook onto the strike plate and make the handle more convenient.
The first step is to unscrew the screw that holds the old latch plate in place. The screws are usually quite tight and require a fair amount of force to loosen them. It might be beneficial to have a second person assist in this area if it is possible.
The latch plate should easily lift itself out of the door once the screws have been removed. If it's stuck or won't move, use a small nail file to scrape around the edges of the latch plate. This will sometimes free the plate.
Now you can prepare the new strike plate to be installed. Using the screws made of wood that came with the new handles, attach the latch plate to the inside of the doorjamb. Do not overtighten your screws because this could cause damage to the strike plate.
If you're not sure if the latch plate is in the right position Try closing and opening the door to see whether it locks and closes correctly. If not, you'll need to adjust the strike plate up or down, or even forward or back until the door closes and latches properly.
If the door is still moving or jiggling, you may need to enlarge the latch hole in the strike plate. This is more common with older doors, but could also be caused by wear and tear hinge mortises that are not deep enough or not the right size for the latch, or because of damaged or broken strike plate. If this is the case, follow the exact procedure to adjust the strike plate, using the use of a metal file instead an hammer and chisel.
Take off the Latch
The latch is a curved metal piece that slides in and out of a hole in the inside of your door. The latch is pushed forward when you turn the handle. It also hooks into an opening in the door frame to keep the door shut. If your door is wobbling when you close, an upgrade to the latch could be all that is needed to fix the issue.
The screws that hold the door latch are difficult to locate, but you can usually put a screwdriver in an insignificant hole on the trim plate and then pry the latch off. After you've removed the trim plate, it should be simple to take off the latch and the bolts that keep the spindle and latch in place.
If the latch is not easily removed, use a paperclip or tool to take it off the handle mechanism. Place the item into the recessed latch slot, and gently twist it or jiggle until you feel that the latch and handle are beginning to separate. You may need to repeat this several times before the latch comes loose enough to pull out.
It should be possible to slide the new latch into its slot without any issues after you've removed the old one. Make sure the latch is positioned correctly in the slot and lined up with the screw chambers, and then use your new screws to secure it to the strike plate and door frame.
Before you install the new handle, make sure to measure your existing backset (the distance from the centre of the big hole on the front of the door to the edge). Check that the latch size of the new handle is equal to the measurement.
You'll need a new cylinder for your lock if you're replacing the handle and latch or your existing one is damaged. If you are not changing locks, a new lock should fit inside your existing recess, and also work with your current keys. Make sure you select an entry point with a rectangular cover plate that match your handles.
Removing the Cover Plate
Door handles can start to look shabby with time However, if you replace them with a contemporary lever-on-rose design, it's a quick and easy DIY and decorating project that will enhance the overall appearance of your home. You can buy complete sets with matching escutcheons, privacy adaptors and escutcheons.
To replace the door handle inside remove the cover plate (or rose) that covers the screws and inner mechanism. Look for an release tab on the plate, and use a flathead screwdriver to pop it off the knob. It may have an opening on one side or be secured by a pin.
Once the cover plate is off take off the screw that holds the inside handle in place, and then set it aside. You'll also want to remove the screws that hold the latch and the plates inside, which you can do by loosening them using the help of a Philips screwdriver. Take the inner plates and latch from the door. Place them aside.
Most doors have an opening between the jamb of the door and the edge of the frame, which allows for a handle, however not all have. If yours does not, you will need to drill a hole in the door. The procedure to do this is the same procedure for opening a door with the lock, however you'll be taking extra care not to harm the frame or door.
Installing new door knob screws is required after the holes have been drilled. Make sure you purchase the same size as the previous ones, to ensure that you won't have an handle that is either too tight or too loose. It's also necessary to install an additional latch plate and strike rod that aren't included in the majority of door handle sets.
If you're looking for a quality replacement for your interior door handle set Try the Amazon's Choice FAERSI two-piece chrome finish handle set. It's a factory fit and has received a plethora of 5-star reviews from happy customers. It's a great choice to replace damaged or worn interior door handle hardware on your Chevy HHR.